Investigation of two-dimensional acoustic resonant modes in a particle separator

Within an acoustic standing wave particles experience acoustic radiation forces, a phenomenon which is exploited in particle or cell manipulation devices. When developing such devices, one-dimensional acoustic characteristics corresponding to the transducer(s) are typically of most importance and determine the primary radiation forces acting on the particles. However, radiation forces have also been observed to act in the lateral direction, perpendicular to the primary radiation force, forming striated patterns. These lateral forces are due to lateral variations in the acoustic field influenced by the geometry and materials used in the resonator. The ability to control them would present an advantage where their effect is either detrimental or beneficial to the particle manipulation process.The two-dimensional characteristics of an ultrasonic separator device have been modelled within a finite element analysis (FEA) package. The fluid chamber of the device, within which the standing wave is produced, has a width to height ratio of approximately 30:1 and it is across the height that a half-wavelength standing wave is produced to control particle movement. Two-dimensional modal analyses have calculated resonant frequencies which agree well with both the one-dimensional modelling of the device and experimentally measured frequencies. However, these two-dimensional analyses also reveal that these modes exhibit distinctive periodic variations in the acoustic pressure field across the width of the fluid chamber. Such variations lead to lateral radiation forces forming particle bands (striations) and are indicative of enclosure modes.The striation spacings predicted by the FEA simulations for several modes compare well with those measured experimentally for the ultrasonic particle separator device. It is also shown that device geometry and materials control enclosure modes and therefore the strength and characteristics of lateral radiation forces, suggesting the potential use of FEA in designing for the control of enclosure modes in similar particle manipulator devices

Screen-printed potentiometric Ag/AgCl chloride sensors: Lifetime performance and their use in soil salt measurements

Silver – silver chloride electrodes (Ag/AgCl) for the detection of chloride ions were fabricated using thick-film technology. Five different formulations were prepared and chloride responses were investigated over time. Almost identical and near Nernstian responses were observed over the first 162 days with an average chloride sensitivity for all formulations of -51.12 mV ± 0.45 mV per decade change in chloride concentration compared with a value of -50.59 mV ± 0.01 mV over 388 days for the best two formulations. After 6-months continuous immersion in tap water, pastes formulated with a glass binder began to exhibit a loss in sensitivity whilst those formulated from a commercial thick-film dielectric paste remained functional for the best part of a year. This difference in lifetime performance is attributed to the inclusion of proprietary additives in the commercial paste aiding adhesion and minimising AgCl leaching. The mechanical and chemical robustness of these electrodes has been demonstrated through their ability to detect changing levels of chloride when immersed in soil columns. This particular capacity will make them an invaluable tool in the fields of hydrology, agricultural science, soil science and environmental science

Structural and Magnetic Properties of Pyrochlore Solid Solutions (Y,Lu)2Ti2-x(Nb,Ta)xO7+/-y

The synthesis and characterization of the pyrochlore solid solutions, Y2Ti2-xNbxO7-y, Lu2Ti2-xNbxO7-y, Y2Ti2-xTaxO7-y and Lu2TiTaO7-y (-0.4<y<0.5), is described. Synthesis at 1600 C, and 10-5 Torr yields oxygen deficiency in all systems. All compounds are found to be paramagnetic and semiconducting, with the size of the local moments being less, in some cases substantially less, than the expected value for the number of nominally unpaired electrons present. Thermogravimetric analysis (TGA) shows that all compounds can be fully oxidized while retaining the pyrochlore structure, yielding oxygen rich pyrochlores as white powders. Powder neutron diffraction of Y2TiNbO7-based samples was done. Refinement of the data for oxygen deficient Y2TiNbO6.76 indicates the presence of a distribution of oxygen over the 8b and 48f sites. Refinement of the data for oxygen rich Y2TiNbO7.5 shows these sites to be completely filled, with an additional half filling of the 8a site. The magnetic and TGA data strongly suggest a preference for a Ti3+/(Nb,Ta)5+ combination, as opposed to Ti4+/(Nb,Ta)4+, in this pyrochlore family. In addition, the evidence clearly points to Ti3+ as the source of the localized moments, with no evidence for localized Nb4+ moments.Comment: Accepted to Journal of Solid State Chemistr

Vibrational signature of broken chemical order in a GeS2 glass: a molecular dynamics simulation

Using density functional molecular dynamics simulations, we analyze the broken chemical order in a GeS$_2$ glass and its impact on the dynamical properties of the glass through the in-depth study of the vibrational eigenvectors. We find homopolar bonds and the frequencies of the corresponding modes are in agreement with experimental data. Localized S-S modes and 3-fold coordinated sulfur atoms are found to be at the origin of specific Raman peaks whose origin was not previously clear. Through the ring size statistics we find, during the glass formation, a conversion of 3-membered rings into larger units but also into 2-membered rings whose vibrational signature is in agreement with experiments.Comment: 11 pages, 8 figures; to appear in Phys. Rev.

Suboptimal blood pressure control in chronic kidney disease stage 3: baseline data from a cohort study in primary care

Background: poorly controlled hypertension is independently associated with mortality, cardiovascular risk and disease progression in chronic kidney disease (CKD). In the UK, CKD stage 3 is principally managed in primary care, including blood pressure (BP) management. Controlling BP is key to improving outcomes in CKD. This study aimed to investigate associations of BP control in people with CKD stage 3.Methods: 1,741 patients with CKD 3 recruited from 32 general practices for the Renal Risk in Derby Study underwent medical history, clinical assessment and biochemistry testing. BP control was assessed by three standards: National Institute for Health and Clinical Excellence (NICE), National Kidney Foundation Kidney Disease Outcome Quality Initiative (KDOQI) and Kidney Disease: Improving Global Outcomes (KDIGO) guidelines. Descriptive statistics were used to compare characteristics of people achieving and not achieving BP control. Univariate and multivariate logistic regression was used to identify factors associated with BP control.Results: the prevalence of hypertension was 88%. Among people with hypertension, 829/1426 (58.1%) achieved NICE BP targets, 512/1426 (35.9%) KDOQI targets and 859/1426 (60.2%) KDIGO targets. Smaller proportions of people with diabetes and/or albuminuria achieved hypertension targets. 615/1426 (43.1%) were only taking one antihypertensive agent. On multivariable analysis, BP control (NICE and KDIGO) was negatively associated with age (NICE odds ratio (OR) 0.27; 95% confidence interval (95% CI) 0.17-0.43) 70–79 compared to &lt;60), diabetes (OR 0.32; 95% CI 0.25-0.43)), and albuminuria (OR 0.56; 95% CI 0.42-0.74)). For the KDOQI target, there was also association with males (OR 0.76; 95% CI 0.60-0.96)) but not diabetes (target not diabetes specific). Older people were less likely to achieve systolic targets (NICE target OR 0.17 (95% CI 0.09,0.32) p?&lt;?0.001) and more likely to achieve diastolic targets (OR 2.35 (95% CI 1.11,4.96) p?&lt;?0.001) for people &gt;80 compared to?&lt;?60).Conclusions: suboptimal BP control was common in CKD patients with hypertension in this study, particularly those at highest risk of adverse outcomes due to diabetes and or albuminuria. This study suggests there is scope for improving BP control in people with CKD by using more antihypertensive agents in combination while considering issues of adherence and potential side effects.<br/

Do environmental concerns affect commuting choices? Hybrid choice modelling with household survey data

In order to meet their ambitious climate change goals governments around the world will need to encourage behaviour change as well as technological progress; and in particular they need to weaken our attachment to the private car. A prerequisite to designing effective policy is a thorough understanding of the factors that drive behaviours and decisions. In an effort to better understand how the public’s environmental attitudes affect their behaviours we estimate a hybrid choice model (HCM) for commuting mode choice using a large household survey data set. HCMs combine traditional discrete choice models with a structural equation model to integrate latent variables, such as attitudes and other psychological constructs, into the choice process. To date HCMs have been estimated on small bespoke data sets, beset with problems of sample selection, focusing effects and limited generalizability. To overcome these problems we demonstrate the feasibility of using this valuable modelling approach with nationally representative data. Our estimates suggest that environmental attitudes and behaviours are separable constructs, and both have an important influence on commute mode choice. These psychological factors can be exploited by governments looking to add to their climate change policy toolbox in an effort to change travel behaviours

Rotational and Vibrational Dynamics of Interstitial Molecular Hydrogen

The calculation of the hindered roton-phonon energy levels of a hydrogen molecule in a confining potential with different symmetries is systematized for the case when the rotational angular momentum $J$ is a good quantum number. One goal of this program is to interpret the energy-resolved neutron time of flight spectrum previously obtained for H$_{2}$C$_{60}$. This spectrum gives direct information on the energy level spectrum of H$_2$ molecules confined to the octahedral interstitial sites of solid C$_{60}$. We treat this problem of coupled translational and orientational degrees of freedom a) by construction of an effective Hamiltonian to describe the splitting of the manifold of states characterized by a given value of $J$ and having a fixed total number of phonon excitations, b) by numerical solutions of the coupled translation-rotation problem on a discrete mesh of points in position space, and c) by a group theoretical symmetry analysis. Results obtained from these three different approaches are mutually consistent. The results of our calculations explain several hitherto uninterpreted aspects of the experimental observations, but show that a truly satisfactory orientational potential for the interaction of an H$_2$ molecule with a surrounding array of C atoms has not yet been developed.Comment: 53 pages, 9 figures, to appear in Phys. Rev B (in press). Phys. Rev. B (in press

A Compact 3H(p,gamma)4He 19.8-MeV Gamma-Ray Source for Energy Calibration at the Sudbury Neutrino Observatory

The Sudbury Neutrino Observatory (SNO) is a new 1000-tonne D2O Cerenkov solar neutrino detector. A high energy gamma-ray source is needed to calibrate SNO beyond the 8B solar neutrino endpoint of 15 MeV. This paper describes the design and construction of a source that generates 19.8-MeV gamma rays using the 3H(p,gamma)4He reaction (``pt''), and demonstrates that the source meets all the physical, operational and lifetime requirements for calibrating SNO. An ion source was built into this unit to generate and to accelerate protons up to 30 keV, and a high purity scandium tritide target with a scandium-tritium atomic ratio of 1:2.0+/-0.2 was included. This pt source is the first self-contained, compact, and portable high energy gamma-ray source (E>10 MeV).Comment: 33 pages (including 2 table, 12 figures) This is the revised manuscript, accepted for publication in NIM A. This revision relfects minor editorial changes from the previous versio

Stuffed Rare Earth Pyrochlore Solid Solutions

Synthesis and crystal structures are described for the compounds Ln2(Ti2-xLnx)O7-x/2, where Ln = Tb, Dy, Ho, Er, Tm, Yb, Lu, and x ranges from 0 to 0.67. Rietveld refinements on X-ray powder diffraction data indicate that in Tb and Dy titanate pyrochlores, extra Ln3+ cations mix mainly on the Ti4+ site with little disorder on the original Ln3+ site. For the smaller rare earths (Ho-Lu), stuffing additional lanthanide ions results in a pyrochlore to defect fluorite transition, where the Ln3+ and Ti4+ ions become completely randomized at the maximum (x=0.67). In all of these Ln-Ti-O pyrochlores, the addition of magnetic Ln3+ in place of nonmagnetic Ti4+ adds edge sharing tetrahedral spin interactions to a normally corner sharing tetrahedral network of spins. The increase in spin connectivity in this family of solid solutions represents a new avenue for investigating geometrical magnetic frustration in the rare earth titanate pyrochlores.Comment: 25 pages, 7 figures, submitted to J. Solid State Che